"Aoyue videos

Xbox 360 BGA Reflow Tutorial. This is the profile for reflowing the CPU and GPU: Items Required: Aoyue 968 Repairing System, Air Nozzle Y3939, Air Nozzle Y4141, Rosin Flux Liquid (Must be Lead Free), Walmart Presto Griddle, Custom made stand for air flow device, and Squirt bottle for liquid flux. Step One: Use squirt bottle with small nozzle to insert flux between BGA and board. Make sure board is on its side in a vertical position. You want flux to ooze out the bottom of the BGA. Rotate the board until flux is coming out of all 4 corners to be sure of an even coverage of flux. (This is optional, we do NOT do this step.) Step Two: Preheat griddle to 350F. Be sure the motherboard is raised ¾ of an inch off of the griddle. Use JB weld, washers, and machine screws to achieve this. Allow the board to preheat for 5 mins. Heat the board itself for 5 mins. Step Three: Use makeshift stand to hold air gun. You do not want to hold it by hand because the chip needs even coverage of...

Varying airflow without affecting the temperature output

A hot air reworking system which uses fan instead of pump to produce hot air.

Aoyue 852A+ temperature being regulated by the cpu

Calibrating a leadfree compatible soldering system

Tip Temperature is at 363 degrees Celsius while set temperature is only 350, Using the digital offset feature of the Aoyue 6031 we offset 16 degrees to make actual tip temperature equal to the set/ displayed temperature.

Turning the smoke absorber switch on/off to see the smoke absorbing action of the aoyue 2702 station.

Reworking a BGA using infra-red soldering system, with split vision micro adjusment for BGA alignment.

Soldering and desoldering components using a solderpot

Turning the Solderpot's filter system on/off to see the effects to the generated smoke.